Description
Shipping & Returns
Loba 2K Fusion Matt – 5KG
Waterborne 2-Component polyurethane finish for wooden floors. A 2K lacquer with an extremely good final hardness, for extremely heavy wear. Elastic, excellent chemical and abrasion resistance.
- Simple and safe application
- Excellent wear resistance
- Good price/performance ratio
- Consumption: 5KG for 40-50m²
- Packaging 5KG Semi-Gloss
Range of use: Suitable for parquet, wood and cork flooring.
How do I apply Loba 2K Fusion, 2 component varnish?
LOBA 2K Fusion is a waterborne 2-component polyurethane finish for wooden floors. For extremely heavy wear. Elastic, excellent chemical and abrasion resistance. Full product information can be found here, but for your convenience, please be advised as follows:
- We recommend firstly applying a prime coat – EasyPrime or PrimaSeal Plus
- Shake product, add hardener to base at a ratio of 10 : 1 and then shake to mix. For mixing smaller quantities, use the LOBA Mixing Container or a scale to weigh out the components.
- Usable up to 2 hours after mixing.
- The surface must be sanded properly, wood moisture content max. 12%
- The floor must be dry and free from any old coatings, oil, grease, wax, silicone, sanding dust and other contaminants.
- Room temperature +15°C to +25°C, relative humidity 40% to 75%, material temperature +18°C to +25°C.
- Ensure working areas are adequately ventilated.
- Transfer material to a LOBA Varnish Bucket before applying.
- Shake the contents well.
- Observe the general and, if available, the product-specific health and safety instructions.
- The product is supplied ready for use and must not be diluted!
Application tool/application rate
- LOBA roller Deluxe 120 / 100-120 ml(g)/m² = 8-10m²/l(kg)
- LOBA roller Microfaser 100-120 / 80-100 ml(g)/m² = 10-12m²/l(kg)
Intermediate sanding
- Able to recoat without intermediate sanding within the first 24 hours. After this time, an intermediate sanding is necessary.
- An intermediate sanding before the last application will achieve a more even finish.
- Use LOBA Perforated Pad P120 or finer, alternatively Sanding Net P120 or finer.
- Carefully remove dust before overcoating. Drying time
- Earliest possible recoating after 4-6 hours.
- Careful use possible after 4-6 hours.
- Earliest possible intermediate sanding after 8-10 hours.
- Light use after 24 hours.
- Full use and covering possible after 5 days.
Data Sheets:
Technical Data Sheet
Safety Data Sheet
